| Customization: | Available |
|---|---|
| After-sales Service: | Free on-Site Guidance to Solve Problems Discovered |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The burner consists of a central column cyclone, observation hole, fire detection and control system, pilot lamp, simplified tube, gas gun (composed of inner and outer guns), air regulating mechanism, flue gas circulation system, etc. The burner adopts advanced technologies such as air classification, fuel classification, rich lean combustion, and flue gas recirculation at home and abroad, which can form a vortex flame in the furnace, reduce the flame length and flame center temperature, and greatly suppress the generation of NOx through segmented combustion, thereby reducing the NOx emissions in the flue gas.
| No. | Item | Material and specifications |
| 1 | The rising section of the air gun tube (with consistent requirements for the pilot light) | 06Cr19Ni10 |
| 2 | Gas nozzle assembly, flame stabilizer (with consistent requirements for the pilot light) | 06Cr25Ni20 |
| 3 | Fire pot brick | LZ-65 high alumina brick, Al2O3 ≥ 65%, fire resistance 1750 ºC |
| 4 | Inside and outside the cylinder, regulating butterfly valve | Q235B, thickness of steel plate≥5mm |
| 5 | Wind regulating rotating shaft | 06Cr19Ni10 |
| 6 | Shell insulation and soundproofing material | Aluminum silicate fiber (refractory temperature 1200-1400 ºC) |
| 7 | Metal hose | 06Cr19Ni10, equipped with matching connectors or flanges |
| Composition, mol% | Condition 1 | Condition 2 | ||
| Natural gas | Desorbed gas | Natural gas | Desorbed gas | |
| H2 | 31.13 | 32.44 | ||
| CO | 7.02 | 6.02 | ||
| CO2 | 0.871 | 44.68 | 0.871 | 47.45 |
| H2O | 0.92 | 0.94 | ||
| CH4 | 94.584 | 15.5 | 94.584 | 12.4 |
| C2H6 | 2.586 | 2.586 | ||
| C3H8 | 0.525 | 0.525 | ||
| NC4 | 0.067 | 0.067 | ||
| IC4 | 0.069 | 0.069 | ||
| IC5 | 0.030 | 0.030 | ||
| NC5 | 0.024 | 0.024 | ||
| C6H14 | 0.064 | 0.064 | ||
| N2 | 0.181 | 0.76 | 0.181 | 0.75 |
| O2 | ||||
| Total flow rate, Kmol/h | 204.75 | 196.47 | ||
| Temperature, ºC | 40 | 40 | 40 | 40 |
| Pressure, Mpa.G | 0.3 | 0.005~0.03 | 0.3 | 0.005~0.03 |
2. Company qualifications
1)Zhongding green heating furnace 95+ technologyZhongding 95+ complete set of technological advantages
a.The thermal efficiency of the heating furnace has been increased to over 95%;
b.Ultra low NOx and ultra-low Coe emissions;
c.The flue gas drops below 80 ºC;
d. Implement the concept of carbon neutrality and peak carbon emissions;
2)Flue gas waste heat recovery technology
Four major advantages:
a. Wide applicability;
b. High heat exchange efficiency, increasing the heating furnace's thermal efficiency by 3%;
c. Low exhaust temperature, resistance to dew point corrosion, and low pressure drop;
d.No scaling or dust accumulation; Variable frequency regulation and simple maintenance
1. We shall ensure that the quality of the supplied products meets the design, construction, and usage requirements;
2. We shall dispatch experienced technical personnel to provide free on-site guidance and solve any problems discovered during the equipment installation and trial operation process, until the trial operation and quality assurance period is 12 months from the date of equipment commissioning. If any manufacturing quality problems occur during the quality assurance period, we'll be responsible for free repair or replacement. We can provide paid services in case of problems arising from improper use by the buyer.
3. We shall provide on-site services during the installation process of their products and effectively supervise the installation quality.
4. During the warranty period, if any manufacturing quality problems are found during the operation of the equipment, we shall respond within 8 hours after receiving the buyer's letter or telegram, and arrive at the site within 24 hours( in China) to solve the problem free of charge until the problem is eliminated. For foreign customers, we will initiate remote assistance within 24 hours to try to solve the problem. If the problem cannot be resolved, we will arrange for a dedicated person to go abroad as soon as possible to assist in resolving the issue until it is resolved.
5. We shall bear the responsibility for the relevant process guarantee. If there is a deviation in operational performance during the warranty period, we'll do our best to collect the necessary data, identify the problem, conduct further analysis, and make necessary modifications to meet the process performance parameters.
Q1: Why is the price range of your product so wide?
A: Due to the uniqueness of the products, almost all of them are customized according to demand. From materials, processing to usage, different customers have different needs, resulting in significant price differences. So we hope that when you inquire, please provide detailed project requirements as much as possible, so that we can provide you with a suitable quotation.
Q2: What products does your company mainly produce?
A: We specialize in the research, design, and manufacturing of auxiliary equipment such as petrochemical heating furnaces, industrial furnaces, burners and their intelligent control systems, regenerative air preheaters, Class A pressure vessels, and furnace accessories. Since its establishment, our company has 17 years of industry experience.
Q3: What are your product advantages?
A: Our green heating furnace 95+technology is a complete set of systems that includes heating furnace equipment, processes, and operation control. It includes these advantages: the heating furnace thermal efficiency has been improved to over 95%; ultra low NOx and ultra-low Coe emissions; the flue gas drops below 80 ºC.
){kind=link}